The Sporting Arms and Ammunition Manufacturers' Institute (SAAMI) lists quite a few cartridge and chamber drawings and the site is a worthwhile reference source
Home page here: http://www.saami.org/index.cfm
The cartridge and chamber drawings can be found on this page: http://www.saami.org/specifications_and ... ?page=ANSI
SAAMI drawings
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: SAAMI drawings
Very useful and an interesting read too!
Who is online
Users browsing this forum: No registered users and 4 guests