Clear out, Bertram Martini Henry cases ect, Rb ball moulds

Message

#1 Post by **dirtbag** » Fri Jun 26, 2015 3:13 pm

Having a clearout of some various bits.

1) 18 used Bertram 577/450 martini henry cases, re-used 3 times not trimmed, will benefit from an anneal.There are 15 pukka ones, and there are 3 that still can be used (and have been), but had collapsed necks at one stage. Some have some scratches on the bottom, but nothing major... Kranks Sell new at £5.10, mine are used so half price and with the scratches I will sell at £40 posted, paypal is + 4%.

2) Martini-Henry Rifle P-1876 Socket Bayonet, again used (but not used by me) sitting around in my gun room collecting dust. Purchased from IMA-USA 4 years ago, has some arabic markings and some pitting. £30 posted paypal + 4%

3)Two Jeff Tanner made rounball moulds hardly used, one is .678 and the other is .662 (Both ideal for use of a paper cartridge in a musket of French Pattern) New £25 each, I'll sell both for £35 posted paypal +4%

4)Mosin nagant 91/30 bayonet , will fit the standard 91/30 has a serial marking on it, £20 posted paypal +4%

Pictures to follow **

#2 Post by **dromia** » Fri Jun 26, 2015 3:21 pm

I'll take the 2 Tanners.

PM me your address for sending the cheque.

froggy · #3 Post by **froggy** » Fri Jun 26, 2015 3:25 pm

If available , I'll take the Martini Henry Bayo

#4 Post by **dirtbag** » Fri Jun 26, 2015 3:35 pm

Some pictures of the Bertram cases.

#5 Post by **dirtbag** » Fri Jun 26, 2015 3:39 pm

dromia wrote:I'll take the 2 Tanners.

PM me your address for sending the cheque.

Moulds Sold pending funds

#6 Post by **dirtbag** » Fri Jun 26, 2015 3:40 pm

froggy wrote:If available , I'll take the Martini Henry Bayo

Bayonet sold pending funds

saddler · #7 Post by **saddler** » Fri Jun 26, 2015 4:24 pm

Is the M91 bayonet still available?

#8 Post by **dirtbag** » Fri Jun 26, 2015 4:28 pm

saddler wrote:Is the M91 bayonet still available?

Sure is Saddler it was used on my M91/30 for show

#9 Post by **dirtbag** » Fri Jun 26, 2015 6:11 pm

May be adding stuff as I find it.

Next for sale is a Lee carbide Ruger .480 die set, ideal for those wishing to neck size Martini henry cases. No longer use as I full length with my Martini Henry Dies.

What's missing :
Dipper
Instructions
Decapping pin.

£18 including postage

saddler · #10 Post by **saddler** » Fri Jun 26, 2015 6:18 pm

If the 91/30 bayonet will fit an M91 I'll take it....
I know one Mosin rifle model takes either bayonet & the other Mosin only takes it's specific bayonet. ...but brain cells are both having a nite off and cannot recall which is which

The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Clear out, Bertram Martini Henry cases ect, Rb ball moulds

Clear out, Bertram Martini Henry cases ect, Rb ball moulds

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Re: Clear out, Bertram Martini Henry cases ect, Rb ball moul

Who is online