Gehmann iris

All things rimfire including target, benchrest, hunters, semi autos and plinkers.

Moderator: dromia

Post Reply
Message
Author
Rockhopper
Posts: 912
Joined: Mon Nov 09, 2015 2:36 pm
Contact:

Gehmann iris

#1 Post by Rockhopper »

I've got a Gehmann 520c adjustable front iris in my Anschutz sight tube - how do I adjust the 520c so that the level bars are level (horizontal)? Can't see anything obvious and no words came with it.
hitchphil
Posts: 908
Joined: Thu Jul 05, 2012 11:56 pm
Home club or Range: Bisley - Mostly
Contact:

Re: Gehmann iris

#2 Post by hitchphil »

Rockhopper wrote:I've got a Gehmann 520c adjustable front iris in my Anschutz sight tube - how do I adjust the 520c so that the level bars are level (horizontal)? Can't see anything obvious and no words came with it.
You should have a 'C' spanner that unlocks the locking ring, then in aim or in a vice turn the entire iris to level then lock with the ring & C spanner. Its a pain often to get it tight you have to estimate the out of horizontal so that when you tighten it it comes in flat.

If you dont cant the gun (if you want to shoot long ranged DONT cant any gun) Best is to put a spirit level across the rear sight & horizontal the gun in a vice, and check the foresight to the same horizontal. To help you can take out the iris & put a 6" steel ruler in the element slot & use that as a horizontal surface to set it all up, then put the iris in & horizontal it to the gun.

http://www.ebay.com/itm/Gehmann-Spanner ... 1896318364
Quality control of Scottish Ethanol. & RDX/HMX

& my fav chemical is :-) 1,3,7-trimethylxanthine.......... used to kill frogs.... but widely consumed & in vast quantities by the French? Eh?
Rockhopper
Posts: 912
Joined: Mon Nov 09, 2015 2:36 pm
Contact:

Re: Gehmann iris

#3 Post by Rockhopper »

Thanks, I assumed that was a lock ring but didn't want to force it in case it wasn't!!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests