Rem 700 torque settings

Message

#1 Post by **BamBam** » Mon Mar 20, 2017 12:08 am

What torque should the action screws be inserted to?
Or is it something I don't need to be concerned about?

#2 Post by **ovenpaa** » Mon Mar 20, 2017 7:43 am

45 ft lbs/5.1nm is what I torque to however it is worth experimenting up and down slightly as you can tune your group size very slightly by subtle changes to the action screw tightness.

#3 Post by **BamBam** » Mon Mar 20, 2017 5:25 pm

Excellent.

Thanks.

Taking it apart to get screw cut and want to assemble correctly.

#4 Post by **BamBam** » Sat Apr 22, 2017 8:57 pm

I only have in/lbs on my torque driver.

#5 Post by **ovenpaa** » Sat Apr 22, 2017 9:00 pm

That should have been 45 in/lbs

#6 Post by **BamBam** » Sat Apr 22, 2017 9:02 pm

I tightened to that, seems fine. Thanks again.

The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Rem 700 torque settings

Rem 700 torque settings

Re: Rem 700 torque settings

Re: Rem 700 torque settings

Re: Rem 700 torque settings

Re: Rem 700 torque settings

Re: Rem 700 torque settings