Reworking a enfield.303 to pistol calibre
Moderator: dromia
-
- Posts: 27
- Joined: Mon Dec 15, 2014 10:37 pm
- Home club or Range: chalfont
Reworking a enfield.303 to pistol calibre
Hi all I'm after some advice.
I would like to have a full length bolt throw Enfield in a pistol calibre for indoor range use.
Firstly I need to acquire 2 shot out examples.
Any calibres to stay clear of?
.45 ACP it's tried and tested and barrels are available.so I was thinking
And possibly 9mm
Thanks Chris
I would like to have a full length bolt throw Enfield in a pistol calibre for indoor range use.
Firstly I need to acquire 2 shot out examples.
Any calibres to stay clear of?
.45 ACP it's tried and tested and barrels are available.so I was thinking
And possibly 9mm
Thanks Chris
-
- Posts: 27
- Joined: Mon Dec 15, 2014 10:37 pm
- Home club or Range: chalfont
Re: Reworking a enfield.303 to pistol calibre
I would consider other rifles to use as the base and action.
I have a k98 in 7.62 that could be offered up
I have a k98 in 7.62 that could be offered up
- Alpha1
- Posts: 8635
- Joined: Fri Nov 12, 2010 8:27 pm
Re: Reworking a enfield.303 to pistol calibre
Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
- AL8
- Posts: 681
- Joined: Fri Sep 02, 2011 8:27 am
- Location: Essex
Re: Reworking a enfield.303 to pistol calibre
I shoot both a swiss K31 and a model 1889 with cast loads and Unique. Works well
- dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
Re: Reworking a enfield.303 to pistol calibre
Armalon has done what you want already
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
- kennyc
- Posts: 2340
- Joined: Wed Jul 20, 2011 11:21 pm
- Home club or Range: hunters NRPC
- Location: Reading West Berks
Re: Reworking a enfield.303 to pistol calibre
perhaps his range, as mine, has a prohibition on downloaded full bore rifles ?Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
-
- Posts: 912
- Joined: Thu Jul 05, 2012 11:56 pm
- Home club or Range: Bisley - Mostly
Re: Reworking a enfield.303 to pistol calibre
Why should / could it have a prohibition? if a rifle is under the MV & Energy why prohibit it because of its 'description'?kennyc wrote:perhaps his range, as mine, has a prohibition on downloaded full bore rifles ?Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
Quality control of Scottish Ethanol. & RDX/HMX
& my fav chemical is :-) 1,3,7-trimethylxanthine.......... used to kill frogs.... but widely consumed & in vast quantities by the French? Eh?
& my fav chemical is :-) 1,3,7-trimethylxanthine.......... used to kill frogs.... but widely consumed & in vast quantities by the French? Eh?
- ovenpaa
- Posts: 24689
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: Reworking a enfield.303 to pistol calibre
Different ranges, different rules.
-
- Posts: 1678
- Joined: Tue Dec 28, 2010 11:32 am
Re: Reworking a enfield.303 to pistol calibre
Reloading for pistol calibres is usually slightly quicker and easier than for rifle cartridges especially if using a progressive press. Perhaps that's the reason?
Re: Reworking a enfield.303 to pistol calibre
I’ve seen some ranges that won’t allow downloads, but wouldn’t give a good reason. It was down to the ‘older’ committee members basically just deciding they didn’t want it so no one else was going to have it.