.577 snider reloading

[jay851]

Hi
After .577 snider reloading gear
Dies brass bullets moulds etc
Atb
Jay

[dodgyrog]

I've got two NDFS 577 S cases - used. Any use to you?

[FredB]

I am shooting the third Snider that I have owned. Never had a set of dies for this calibre. Fill the cases up with the black stuff, plus wad, grease cookie and whatever else you think aids accuracy and pop a bullet on top. Unless your cases are to be used in more than one rifle, there is no need to re size them.
Fred

[fra150l]

Convert from 24g shotgun brass. That is what I do but you need the dies and they are expensive.

[dromia]

I have 24 bore new brass is you wish to go that route.

[jay851]

Anything will help guys thanks. Yes going the 24g magtech route
Atb
Jay

[fra150l]

You will need to anneal and trim down the brass. If you can get access to a lathe - small mini lathe will make job a lot easier.
I have the Lee dies they are larger than other standard size so check you have press for them. There are others that fit a standard press but they are more expensive.

[jay851]

Have now been sorted NDFS .577 snider die set and some brass thanks to dro Mia.
Brass and bullets or moulds still considered.

[mag41uk]

I have some ndfs brass I can sell on.

[jay851]

I have some ndfs brass I can sell on.

Pm sent.