Hi
I'd like to replace my Lee 303 F/L resizing die without having to spend money on a complete Pacesetter set. Can anyone tell me if the F/L die is the same in each set? Pacesetter F/L code is 91086
Cheers
Donald
Lee RGB v Pacesetter
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
ukrifleman
- Full-Bore UK Supporter
- Posts: 755
- Joined: Thu Jun 07, 2012 7:26 pm
- Contact:
Re: Lee RGB v Pacesetter
As far as I am aware, the only difference between Pacesetter and RGB dies, is that you don't get the shell holder and powder scoop with RGB dies.
I have a set and found no difference in performance or quality.
ukrifleman
I have a set and found no difference in performance or quality.
ukrifleman
-
MrD
- Full-Bore UK Supporter
- Posts: 274
- Joined: Wed Jan 18, 2012 10:47 pm
- Location: Forres, Moray
- Contact:
Re: Lee RGB v Pacesetter
Much appreciatedukrifleman wrote: ↑Tue Oct 12, 2021 1:31 pm As far as I am aware, the only difference between Pacesetter and RGB dies, is that you don't get the shell holder and powder scoop with RGB dies.
I have a set and found no difference in performance or quality.
ukrifleman
Re: Lee RGB v Pacesetter
Both sets of these dies from Lee seem identical to me & in use
Who is online
Users browsing this forum: No registered users and 3 guests