Dillon RL-1000B currently set up for .303 British which it rattles out at a fair rate. It comes with a case feeder updated metering system which throws really accurately. It also comes with .303 dies, plates for .45ACP. .223, .357 and .308 from memory. Plus primer tubes etc. Happy to swap to a different set of dies if I have them. The .223 and .357 dies will be Dillon. £750.00
https://shootingshed.co.uk/wp/2017/04/t ... -rl-1000b/
RCBS Summit press. I have run a couple of these side by side for mandrel work and seating and they work very nicely £195.00 (They are near £400 new!)
Forster C0-Axial primer seater, mounted on a nice piece of Ash, I really do like this table top primer tool and it is really quick to use as well. £95.00 (Probably £145.00 to £150.00 if you can find one in stock)
Sinclair case neck sorting tool with a couple of bushings and a 0.001" dial, I doubt you will find one for sale in the UK which is a shame as they are brilliant. £80.00
Caldwell precision ballistic chrono plus IR screens, this was the one used in the workshop for checking air rifle energy. A couple of dints from errant air gun pellets courtesy of the apprentice. £125.00 new is probably twice that, again if you can find one.
Sinclair white nylon WSM/SAUM load trays. £20.00 pair
Sinclair expander die plus a block of 25+ mandrels to suit many applications, some are factory and some are machined to suit. Probably £300.00 or more new. £85.00
Harrell Premium powder measure plus extension stand and drop tube. Find one if you can, we got this, used it a bit and then left it and it took a while before I used it again and realised just how good and how accurate they are. £195.00
Box of assorted stuff £60.00 (Bargain!)
All plus postage at cost.