how do you know your loads are within the velocity/energy limits of the club safety certificate?channel12 wrote: ↑Fri Jan 06, 2023 12:04 pm I have read and re-read your original post and my question is why do you need the MV of every batch you shoot? I don't think I have ever chrono'd my .38spl/.357 loads because I'm shooting at my club's range and once I had a load that gave a good group I didn't the MV. My .223 loads I do chrono to get ballistic data out to 500 yards.
To echo Laurie find the load and bullet that gives you the best group and then chrono that if necessary.
Checking velocity in club range
Moderator: dromia
Forum rules
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
Re: Checking velocity in club range
Re: Checking velocity in club range
If it's an indoor range they may have a MV limit set.
Never argue with an idiot, he will drag you down to his level and beat you with experience.
- channel12
- Posts: 998
- Joined: Tue Feb 05, 2013 11:30 pm
- Home club or Range: WNSC
- Location: Worcestershire
- Contact:
Re: Checking velocity in club range
From OP's posts "I’m using unique with cast bullets with a similar powder charge that’s proven to work well and be within limits. I’m about 30% under the max energy allowed. I’m not going to add anymore powder so I’d be surprised if slight changes are going to put me over the range limits"
That's why I said I had read what he posted.
That's why I said I had read what he posted.
-
- Posts: 54
- Joined: Tue May 18, 2021 3:15 pm
- Contact:
Re: Checking velocity in club range
This sounds like a great way of doing it. You can use the chrono if you want or just ignore it, I guess it’s something like the Caldwell.Rockhopper wrote: ↑Thu Jan 05, 2023 6:53 pm I went to the tunnel range out Ashbourne way, they have a chrono that sits a few feet in front of the barrel, just shoot normally and it prints out your velocity. No idea what kind it was but It worked fine and told me everything I need to know. That’s probably not very helpful to anyone!
The issue we might have is it would get hit by the electric target retrieval every time you wanted to change targets and you would have to go in front off the firing line to set it up. I’m sure that would be ok when the range is quiet. The disadvantage is we can’t set it up and leave it.
I’ve seen videos where people use a labradar but they are always in a field on their own. Has anyone got experience with using one With someone also stood next to you shooting. I’m guessing it would be useless in that situation or can it be programmed to ignore all the shots that don’t happen in your shooting lane?
Cheers
Re: Checking velocity in club range
Like I said in a earlier post the yarners have a firing point set up with a chrono you just shoot through and it has electronic pad that shows you how fast your round is traveling. You shoot five rounds through it then move onto another firing point and shot for accuracy. What is so complicated about that.
- phaedra1106
- Posts: 3414
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Checking velocity in club range
Range limts at St.Giles Yarners (25yd indoor) are,
Max Cal .455"
Max MV 1710fps - 521m/s
Max ME 475ftlb - 644 Joules
Max Cal .455"
Max MV 1710fps - 521m/s
Max ME 475ftlb - 644 Joules
There's room for all Gods creatures, next to the mash and gravy :)
Re: Checking velocity in club range
Similar to many indoor ranges I think. That's less than 1,200 fps with a .357 158gn lead bullet and less than 1,000ftps with a 240gn .44 lead bullet. Very easy to exceed with a gallery rifle.phaedra1106 wrote: ↑Sat Jan 07, 2023 9:29 am Range limts at St.Giles Yarners (25yd indoor) are,
Max Cal .455"
Max MV 1710fps - 521m/s
Max ME 475ftlb - 644 Joules
Who is online
Users browsing this forum: No registered users and 1 guest