Reloading dies and case prep items, mostly Lee

[Mattnall]

Hi all,

I have some dies that are no longer needed and some I collected from who alone know where. Items priced individually but open to offers, postage at cost or pick up from near Bishop's Stortford/Harlow or I get to Bisley once or twice a month. On other sites too.
I'll post pictures if you want them but dies are dies and there's not much to look at. Set number is purely so I know which one is which without unpacking the whole box .


Set 1: .300WM Lee 2 die collet set, collet neck sizer/decap die and seating die, instructions, #90722. £15
Also included is a body sizing die with no decap stud.

Set 2: .243WIN Lee 3 die set, #90504 - FL sizer, seating die and factory crimp die, dipper included, plastic storage box, £20
An extra seating die is included, perhaps to pre-set for those different bullets.

Set 3: .223REM Lee collet neck sizing/decap die, #90954, plastic storage box, £10

Set 4: RCBS 30-30 2 die set (Group A #14601), plastic storage box, £20

Set 5: .44/40WCF Lee Die Set, set #90564, 3 dies - FL sizer, seating die and factory crimp die, case holder and dipper included, plastic storage box, £20
Also including the case length gauge for cutter including shell holder (#90168) and shell holder for the auto prime (#90272),instructions.

Set 6: .45Colt Lee Die Set, set #90586, 3 dies - FL sizer, seating die and expander die, case holder and dipper included, plastic storage box with instructions, £20
Also including the case length gauge for cutter including shell holder (#90163).

Set 18: .32/20 Lee die set #90751, FL sizer, seating die and expander die, case holder and dipper included, plastic storage box with instructions, £20
Also including the shell holder for the auto prime (#90206).

Lee Factory Crimp dies, boxed with instructions, £5.00 each:
Set 12: .38/.357 #90861
Set 13: .45ACP #90785
Set 14: .44Spl/Mag/etc. #90863
Set 15: .44/40 #90854
Set 16: .45Colt/.454Casull #90865
Set 17: .32/20WCF #90851

Various Lee case length gauges for cutter including shell holders (cutter and Lock Stud needed), I'll throw them in with the dies above if they match. Free, just cover any postage.
Set 8: .357Mag #90157
Set 9: .45/70 #90152
Set 11: .223REM/5.56NATO #90114

Various other case prep bits, free, just cover postage;
Cutter and lock stud, 3 sets
Chamfer tool (#90109)
Auto prime shell holders numbers 2 (.308, .260 etc. 2 off), 4 (.223, .300BLK etc), 8 (.45/70Gov't) and 11 (.44Spl/Mag).
Press shell holder for .44Spl/Mag (#11)
Primer pocket scraper for both large and small pockets.

[mr smith]

Set 14: .44Spl/Mag/etc. #90863

I'll take this thanks.

[Mattnall]

Set 14: .44Spl/Mag/etc. #90863

I'll take this thanks.

I'll PM you later.

[Mattnall]

Set 4: RCBS 30-30 2 die set (Group A #14601) and Set 5: .44/40WCF Lee Die Set, set #90564 provisionally gone.

[Mattnall]

Stuff remaining as at lunchtime Monday:

Set 1: .300WM Lee 2 die collet set, collet neck sizer/decap die and seating die, instructions, #90722. £15
Also included is a body sizing die with no decap stud.

Set 2: .243WIN Lee 3 die set, #90504 - FL sizer, seating die and factory crimp die, dipper included, plastic storage box, £20
An extra seating die is included, perhaps to pre-set for those different bullets.

Set 3: .223REM Lee collet neck sizing/decap die, #90954, plastic storage box, £10

Set 4: Provisionally SOLD

Set 5: Provisionally SOLD

Set 6: .45Colt Lee Die Set, set #90586, 3 dies - FL sizer, seating die and expander die, case holder and dipper included, plastic storage box with instructions, £20
Also including the case length gauge for cutter including shell holder (#90163).

Set 18: .32/20 Lee die set #90751, FL sizer, seating die and expander die, case holder and dipper included, plastic storage box with instructions, £20
Also including the shell holder for the auto prime (#90206).

Lee Factory Crimp dies, boxed with instructions, £5.00 each:
Set 12: .38/.357 #90861
Set 13: .45ACP #90785
Set 14: Provisionally SOLD
Set 15: .44/40 #90854
Set 16: .45Colt/.454Casull #90865
Set 17: .32/20WCF #90851

Various Lee case length gauges for cutter including shell holders (cutter and Lock Stud needed), I'll throw them in with the dies above if they match. Free, just cover any postage.
Set 8: .357Mag #90157
Set 9: .45/70 #90152
Set 11: .223REM/5.56NATO #90114Provisionally gone

Various other case prep bits, free, just cover postage;
Cutter and lock stud, 2 sets
Chamfer tool (#90109)
Auto prime shell holders numbers all gone.

[Mattnall]

List updated Friday 20/1/23 lunchtime:

Set 1: .300WM Lee 2 die collet set, collet neck sizer/decap die and seating die, instructions, #90722. £15
Also included is a body sizing die with no decap stud.

Set 2: .243WIN Lee 3 die set, #90504 - FL sizer, seating die and factory crimp die, dipper included, plastic storage box, £20
An extra seating die is included, perhaps to pre-set for those different bullets. SOLD pending the usual.

Set 3: .223REM Lee collet neck sizing/decap die, #90954, plastic storage box, £10

Set 6: .45Colt Lee Die Set, set #90586, 3 dies - FL sizer, seating die and expander die, case holder and dipper included, plastic storage box with instructions, £20
Also including the case length gauge for cutter including shell holder (#90163).

Set 18: .32/20 Lee die set #90751, FL sizer, seating die and expander die, case holder and dipper included, plastic storage box with instructions, £20
Also including the shell holder for the auto prime (#90206).

Lee Factory Crimp dies, boxed with instructions, £5.00 each:
Set 12: .38/.357 #90861
Set 13: .45ACP #90785
Set 15: .44/40 #90854
Set 16: .45Colt/.454Casull #90865
Set 17: .32/20WCF #90851

Various Lee case length gauges for cutter including shell holders (cutter and Lock Stud needed). Free, just cover any postage.
Set 8: .357Mag #90157
Set 9: .45/70 #90152

Various other case prep bits, free, just cover postage;
Cutter and lock stud, 2 sets
Chamfer tool (#90109)