The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Can you clarify

SGC = Southern Gun Company

or

SGC = Sportsmans Gun Centre

Would not want to be defaming the wrong outfit.

John MH wrote:Can you clarify

SGC = Southern Gun Company

or

SGC = Sportsmans Gun Centre

Would not want to be defaming the wrong outfit.

I think that's already been done John.

had my first try with a 10-22 last night and loved it, very easy to use rifle, it had standard barrel and i was impressed with the grouping it would do.

Dannywayoflife wrote:The problem with mine is the groups out past 50 yards open way up like 2-3" it's a tack driver inside that. I've tried a lot of ammo through here and it doesn't seem to make any difference. I'm going to try some proper match ammo and see what that will do but think if that don't work ill maybe get a 12.5" vq

It sounds like you have other problems than bad barrel. If the barrel as 'bad' then it'd show at all distances and would get worse with range.

Cheap option would be to first have the barrel re-crowned then see what it shoots like. Remember it is still only a 22 semi, whatever you do to it or spend on it. If you want consistency at distance you'd be better spending the money on a CZ or similar bolt gun and keep the 10/22 for short range work. You might find a second hand bolt gun will be of similar cost to a new barrel, and you'll have another toy to play with.

I'm quite surprised by some of the comments here. You only have to look as far as the US forums to see what people are acheiving with these things. Go down to Bisley to any of the Gallery Rifle competitions and you'll also see a great number of incredibly accurate 10/22s. I have one built by Rude Fat Dog with a 12.5" VQ Barrel on it and it's phenomenally accurate, my mate has a KID Stainless Barrel on his and I'd say that it was ever so slightly more accurate again. My uncle's heavy barrel CZ bolt action, regardless of ammo choice, can't live with either when it comes to small groups.

Factory barrels on 10/22s are not all created equal; you might get a cracker and you might get a pig. If your barrel is clean, properly clean, you're on a decent rest/bipod and still aren't getting the groups you want, change the barrel. It's the quickest, easiest way to get more accuracy out of a 10/22.

Mattnall wrote:

Dannywayoflife wrote:The problem with mine is the groups out past 50 yards open way up like 2-3" it's a tack driver inside that. I've tried a lot of ammo through here and it doesn't seem to make any difference. I'm going to try some proper match ammo and see what that will do but think if that don't work ill maybe get a 12.5" vq

It sounds like you have other problems than bad barrel. If the barrel as 'bad' then it'd show at all distances and would get worse with range.

Cheap option would be to first have the barrel re-crowned then see what it shoots like. Remember it is still only a 22 semi, whatever you do to it or spend on it. If you want consistency at distance you'd be better spending the money on a CZ or similar bolt gun and keep the 10/22 for short range work. You might find a second hand bolt gun will be of similar cost to a new barrel, and you'll have another toy to play with.

The barrel was cut and crowned by syss so I know it's good. I have to say I know that after market barrels are far better as I had one it was just too long. I just wanted really to hear opinions on which of the custom barrels were considered the best.

Cheers

If you want consistency at distance you'd be better spending the money on a CZ or similar bolt gun and keep the 10/22 for short range work. You might find a second hand bolt gun will be of similar cost to a new barrel, and you'll have another toy to play with. [/quote]

I couldn't agree more!

I am (have been) having the same dilemma, custom the 10/22 (barrel and stock) or CZ bolt for the same money?

I have a Timney trigger and power custom bolt handle (Power Custom firing pin and extractor to fit) which is probably about as much as you should need to modify on a 10/22: it then gets in to wants not needs.

I have a CZ bolt and CZ 512 S/A Both work well to 100yrds with standard CCI. Better with a mod on though...really good value for money. Pity you can't get a 25rnd mag...