The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Blackstuff wrote:Would it work on something like this:


The 'barrel' is around 22mm

It will depends from the flutes. If it's only for "beauty" - no problem, if the gases goes through the holes you will need another can with reflex design.
You already have a some kind of nut on the barrel - it will right way to use it.

Here one of my reflex can and my drum mag:

flutes, If it's only for "beauty"

Yes just for show the barrel is right to the end...

bnz41 wrote:flutes, If it's only for "beauty"

Yes just for show the barrel is right to the end...

I have made two collets for 22mm barrels(cz thumbhole), but the collet and nut must be increased. I'm not able to anode small batches at this reason it will look like at this picture:

kyk wrote:

bnz41 wrote:flutes, If it's only for "beauty"

Yes just for show the barrel is right to the end...

I have made two collets for 22mm barrels(cz thumbhole), but the collet and nut must be increased. I'm not able to anode small batches at this reason it will look like at this picture:

Thats what semi gloss black paint is for, covering up bright metalwork.....Can looks good by the way.

Are those hollow point rounds in the drum mag?

bnz41 wrote:
Are those hollow point rounds in the drum mag?

Yes, this is subsonic HPs, 71 is onboard.

kyk wrote:

bnz41 wrote:flutes, If it's only for "beauty"

Yes just for show the barrel is right to the end...

I have made two collets for 22mm barrels(cz thumbhole), but the collet and nut must be increased. I'm not able to anode small batches at this reason it will look like at this picture:

Nice Knurling