I agree entirely, but what sets a gatlin apart is the constant fire it produces. I feel this would attract a lot of attention from the police, more so than level release and Sect 1 L1A1s and M14s.legs748 wrote:It is an interesting discussion that occurred to me last week when I was at Leeds armouries. Now we have actions like lever release and MARS on sec 1, that need an extra imput from the firmer to chamber the next round then why wouldn't a Gatling be classified similarly as it needs constant input from the firer to load, fire, eject and reload each chamber through the turning of the crank? Thus proving it's not automatic, or even semi automatic, as the firer provides the impetus for operating a 100% manual action.
Buying/loading/making .45 Gatlin Cartridge
Moderator: dromia
-
- Posts: 129
- Joined: Sun Feb 15, 2015 2:11 pm
- Home club or Range: LERA
- Contact:
Re: Buying/loading/making .45 Gatlin Cartridge
- Blackstuff
- Full-Bore UK Supporter
- Posts: 7839
- Joined: Sun Nov 07, 2010 1:01 pm
- Contact:
Re: Buying/loading/making .45 Gatlin Cartridge
No part of the Firearms Act refers to 'volume/rate of fire', it's entirely focused on the action and size of the gun. A 200lb, 4 man crewed, carriage mounted gun is hardly a practical weapon outside of a sub 19thC battlefield 

DVC
- dromia
- Site Admin
- Posts: 20220
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Buying/loading/making .45 Gatlin Cartridge
That along with its high portability and concealability would no doubt make it a real threat in the establishment's eyes.TomEnfield wrote:I agree entirely, but what sets a gatlin apart is the constant fire it produces. I feel this would attract a lot of attention from the police, more so than level release and Sect 1 L1A1s and M14s.legs748 wrote:It is an interesting discussion that occurred to me last week when I was at Leeds armouries. Now we have actions like lever release and MARS on sec 1, that need an extra imput from the firmer to chamber the next round then why wouldn't a Gatling be classified similarly as it needs constant input from the firer to load, fire, eject and reload each chamber through the turning of the crank? Thus proving it's not automatic, or even semi automatic, as the firer provides the impetus for operating a 100% manual action.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: Buying/loading/making .45 Gatlin Cartridge
Not sure, the person who was at the event did not pick me up any fired brass and he was not sure himself as it was only one of several interesting things. I do know the owner as we have met in the past however it is a while since we spoke last. He has one of my 'scopes so it is probably time I gave him a call.TomEnfield wrote:What caliber was it?Ovenpaa wrote:Interesting, I know of one in the UK that was test fired only 3-4 weeks ago.
- legs748
- Posts: 240
- Joined: Sat Jul 07, 2012 1:08 pm
- Home club or Range: Mattersey R&PC
- Location: North Nottinghamshire
- Contact:
Re: Buying/loading/making .45 Gatlin Cartridge
Could you imagine trying to get the barrelled action into a cabinet?dromia wrote:That along with its high portability and concealability would no doubt make it a real threat in the establishment's eyes.TomEnfield wrote:I agree entirely, but what sets a gatlin apart is the constant fire it produces. I feel this would attract a lot of attention from the police, more so than level release and Sect 1 L1A1s and M14s.legs748 wrote:It is an interesting discussion that occurred to me last week when I was at Leeds armouries. Now we have actions like lever release and MARS on sec 1, that need an extra imput from the firmer to chamber the next round then why wouldn't a Gatling be classified similarly as it needs constant input from the firer to load, fire, eject and reload each chamber through the turning of the crank? Thus proving it's not automatic, or even semi automatic, as the firer provides the impetus for operating a 100% manual action.
It was working when i left it...........
- Dark Skies
- Posts: 2856
- Joined: Tue Apr 22, 2014 11:02 am
- Home club or Range: NRA
- Contact:
Re: Buying/loading/making .45 Gatlin Cartridge
That's got me thinking about the purchase of one of these for a .22 ...
https://www.youtube.com/watch?v=jif4Wo0LDX8
https://www.youtube.com/watch?v=jif4Wo0LDX8
"I don't like my job and I don't think I'm gonna go anymore."
Re: Buying/loading/making .45 Gatlin Cartridge
Interesting - As far as I can recall, some of the early Gatling guns used a sort of cylindrical sleeve that the ammunition was pre-loaded into. This, of course, was a great aid to reliably feeding using the gravity or hopper feeding system.
Who is online
Users browsing this forum: No registered users and 4 guests