Autotrickler V4 Vs SuperTricker

[DaveT]

Only issue I have is having to shim the back by 10 thou for short kernel powders and 20 thou for large kernel like N560.
This alters the flow rate.
An adjustable dial at the back would have been nice.

Thanks that's useful... Is this the V4?

Yep V4

[HALODIN]

I do have a couple of questions... when you've got that u shape thing stuck to the base plate, how do you calibrate your scale?

Exactly the same as without it. Calibration starts with setting zero, so any variation in the balance pan weight is excluded.

Imagine if the balance pans all had to weigh exactly the same (to less than 1 mg in this case) - that would be a manufacturing nightmare. Then consider that the weight would change over time. Then consider extending that to 0.1mg balances.
You can calibrate just fine with a powder pot locator. I made my first pot locator from card and sellotape (It's still like that), then shortly after I showed video of it these fancy machines ones arrived.

Thanks... that's what I thought and your description makes perfect sense. Maybe you should have kept your pot locator video to yourself!

They do look nice... I'm pretty sure I'll buy a V4...

[HALODIN]

Only issue I have is having to shim the back by 10 thou for short kernel powders and 20 thou for large kernel like N560.
This alters the flow rate.
An adjustable dial at the back would have been nice.

Thanks that's useful... Is this the V4?

Yep V4

Thanks!