I have single shot rugers, neck sized only don't lub so don't have to clean.
Forgot to say for my 357 loads I have carbide dies ( have 2 set ups, 1 for 38 and 1 for 357) No lub so no clean.
Getting rid of lube in cases
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Mauserbill
- Full-Bore UK Supporter
- Posts: 1145
- Joined: Thu Jun 22, 2017 4:49 pm
- Home club or Range: Range
- Contact:
Re: Getting rid of lube in cases
Hello
So what happens if you don`t remove the minimal amount of sizing wax that is used ?
So what happens if you don`t remove the minimal amount of sizing wax that is used ?
-
Daryll
- Posts: 1048
- Joined: Sat Jun 14, 2014 9:07 am
- Home club or Range: Isle Target Sports Club
- Location: Cambridgeshire
- Contact:
Re: Getting rid of lube in cases
I would imagine you lose the friction of the case against the chamber walls, so the bolt lugs take the whole pressure...?
Same thing as "dont fire wet ammo"...for the same reason...
Same thing as "dont fire wet ammo"...for the same reason...
Who is online
Users browsing this forum: No registered users and 0 guests