SHED is now stocking all of your Reloading needs

[ovenpaa]

There are a few different head stamps available at around or under GBP25/100 - I will confirm the prices in a bit.

[John MH]

Going to get any Lapua .260 Remington?

[ovenpaa]

John,

.260 Lapua brass is £95.08/100 list and we sell them for £80.70/100 plus postage at cost

[ovenpaa]

Dougan,

PPU is GBP12.81/100 plus some postage List is GBP14.94
Relcom is GBP25.12/100 again plus postage to you. List is 29.23

[Dougan]

Dougan,

PPU is GBP12.81/100 plus some postage List is GBP14.94
Relcom is GBP25.12/100 again plus postage to you. List is 29.23

200 Relcom please - It may be the same as the 'R-P' stamped stuff I've been using (?) - I've been using it for 2 years, and there's still life in them yet, though they have ejector marks from my previous Winchester...so will be nice to have some new brass for best

Let me know the total cost by PM, and I'll get a cheque away (Btw it was £31/100 on one site I looked at...)

:cheers:

Dougan

[ovenpaa]

You look at the wrong sites!

We are doing our best to offer between 15% and 22.5% off list of all products however there are some exceptions and of course there is postage, having said that as we post at cost and do offer such discounts then it should still be worth buying mail order even if it is only a modest saving, given the price of fuel it has to be worth it...

[Alpha1]

Are you stocking comparators for .308

[majordisorder]

How about Starline .45 Super brass?

[greenshoots]

looking for marlin 444 and .270 winchester

greenshoots

[ovenpaa]

We have a range of comparators for .308 and other cartridges.

Insert only to suit Hornady type gauges.

Single sided only.

3P - Three part comparators which comprise of a head section, bullet section and alignment tube so the comparator is always perfectly aligned when it is locked into the vernier gauge.

2P - As above however it comprises of two sections only.

2PA - As above however it is an alternate design.

All of the inserts and comparators are machined from 6082 T6 polished aluminium and are fitted with two thumb screws and two grub screws to ensure precise locating within the jaws of the vernier. They are machined with a bore to emulate the point at which the bullet engraves the lands and the head section is machined to Triebel standard chamber dimensions.

The 3P is the most popular and is currently used by many different shooters including BR, F/TR and F Open, we have some of the worlds top shooters using them. I will post some pictures up to show the differences.

All three comparators are unique to the Shooting SHED and the designs are protected so hopefully they will remain unique.