High Tower Armoury 90/22 stock (FN P90 clone) for Ruger10/22

[Blackstuff]

Bootiful! Have you got a case deflector/know where you can get one from?

[Brookers]

The case deflector now comes as standard with the kit.
I will get some pics of mine for you later

[Brookers]

Here's mine, red dot has been changed now for the Shield SIS.

[Adamdavi3s]

Damnit guys, I had just convinced myself that the RM-22 chassis was the way to go with my donor 10/22 but now I am back on the 90/22 after seeing these photos!

I think I might have to suck it up and order from Brownell... I've got a brother stateside but by the time you add on duty & shipping etc it works out about the same price as buying one from them.

Although mine with an 18" SS barrel is gunna look kind of funky....

[Brookers]

Just go for it, you know you want to

[Adamdavi3s]

Balls to it I ordered it....

[jay851]

Sorry to dig this old thread up, but just wondered if the barrel could be chopped down to 12.5" on this kit, or will it take it below legal overall length.
Atb
Jay

[Kungfugerbil]

Sorry to dig this old thread up, but just wondered if the barrel could be chopped down to 12.5" on this kit, or will it take it below legal overall length.
Atb
Jay

That would take it below. From the Brownells Page:

“The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length”

So it looks like 16.25” barrel would be the shortest you could reasonably go to remain comfortably ok.

[breacher]

Sorry to dig this old thread up, but just wondered if the barrel could be chopped down to 12.5" on this kit, or will it take it below legal overall length.
Atb
Jay

That would take it below. From the Brownells Page:

“The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length”

So it looks like 16.25” barrel would be the shortest you could reasonably go to remain comfortably ok.

Surely the whole idea of a bull-pup is to be able to get a short firearm WITH a full length barrel !

[jay851]

Sorry to dig this old thread up, but just wondered if the barrel could be chopped down to 12.5" on this kit, or will it take it below legal overall length.
Atb
Jay

That would take it below. From the Brownells Page:

“The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length”

So it looks like 16.25” barrel would be the shortest you could reasonably go to remain comfortably ok.

Surely the whole idea of a bull-pup is to be able to get a short firearm WITH a full length barrel !

Very true fella I just like the short barrel protruding as per original p90