Good reloading practice

[Oddbod]

I picked up a Stoney Point (now Hornady) OAL gauge, bullet comparator & various modified cases & find it invaluable for accurately seating bullets a certain distance from the lands - especially with soft points.
I was working up .270 loads & found up to 0.030" difference in Sierra Pro Hunter bullets measured from the tip but less than 0.002" using the comparator.

[CopperSkink]

That is exactly what I'm purchasing next - hopefully within the next week. Measuring COL with softpoint bullets seems to be so inaccurate. I'm guessing the inaccuracies is with the balistic tips aswell but not as big (no experience there - just a guess)

[DaveT]

Also worth getting their headspace gauges to check what sizing your dies are giving re that measure....useful both for checking any need to 'bump' shoulders after repeated neck sizing OR to see if your FLS process / die is creating too much headspace for safetys sake.

[Griff]

I love this thread. I would really like to be able to get into reloading but don't do enough shooting to justify it.

A lot of this is very technical for me but when looking at bullets, cases, different powders, head spacing, crimping etc I cringe at the thought of where I would start if I could. sign85

Too many powders for the inexperienced sign01

[rox]

Making TR ammo is pretty straight-forward - there's only one or two powders you need to think about, and really only one bullet if you want to train for things like, oh I don't know, Glasgow? If you want to shoot for 40p per round instead of 70-95p just make sure you keep any brass you use (but not the steel stuff you'll start to get from the WRA this season) and keep your eyes peeled for second hand loading kit coming onto the market. My initial set of kit cost about £100.00, and with a few additions is perfectly capable of producing ammo that exceeds the performance of RUAG of HPS.

..

I love this thread. I would really like to be able to get into reloading but don't do enough shooting to justify it.

A lot of this is very technical for me but when looking at bullets, cases, different powders, head spacing, crimping etc I cringe at the thought of where I would start if I could. sign85

Too many powders for the inexperienced sign01

[DaveT]

I love this thread. I would really like to be able to get into reloading but don't do enough shooting to justify it.

A lot of this is very technical for me but when looking at bullets, cases, different powders, head spacing, crimping etc I cringe at the thought of where I would start if I could. sign85

Too many powders for the inexperienced sign01

Its like most new activities...once you have sorted the basics all becomes clear....then you start to look at advanced stuff and its gets cloudy again!

[Alpha1]

I love this thread. I would really like to be able to get into reloading but don't do enough shooting to justify it.

You dont have to justify it just do it because you want to. :shakeshout:

[GazMorris]

A lot of this is very technical for me but when looking at bullets, cases, different powders, head spacing, crimping etc I cringe at the thought of where I would start if I could.

Assuming this is Griff Morgan (which I'm guessing from Bob's comment about Glasgow 2014) I've got the kit, so the next time we're both down, swing by my van with a handful of RUAG brass shot in your rifle and I'll show you how it's done!

Cheers,

Gaz

PS - If it's not Griff Morgan, sorry!

[Steve E]

Hi Gaz nice to see you here at last (go and introduce yourself in the new new members lobby). Yes it is the one and only Griff Morgan.

See you at Bisley soon

Steve E

[zeroveez]

Whereas the Stoneypoint guage is the dog's dangly bits in terms of COL measurement, (I own one and have made another a la Shed), the Nosler reloading manual does give sensible instructions on how to make a measurement using a fired case and the proposed bullet; page 43 in the 6th edition and page 34 in the fourth. (Sorry, I can't find the fifth edition).
Zeroveez