Kriss Defiance DMK22 Food

[Fenix1]

Probably going to hang on until the Phoenix comps end of May and see whats available there. What optics are people using? Thinking of putting a Konus T30 on whatever I get.

[snayperskaya]

Probably going to hang on until the Phoenix comps end of May and see whats available there. What optics are people using? Thinking of putting a Konus T30 on whatever I get.

I have a Vortex Strike Eagle 1-6x24, very clear optics and a nice illuminated reticle.On 1x it works like a red dot but has the advantage of variable magnification.

[Andy]

I recently acquired a Kriss and it came with two 15 round Kriss mags and I have purchased two 25 round Kriss mags but on taking to the range for the first time on Sunday it functioned flawlessly with the 15 rounders but if I loaded the 25 round mags to capacity it wouldn't feed properly.

I loaded them with 15 and things were perfect so I then loaded them with 20 and again it run like a top, it is almost like the extra five rounds puts too much tension on the mag spring.Anyone else had this problem and is there a remedy, other than just loading 20.I did wonder if shortening the spring slightly may help.I also have a couple of S&W mags with it but I must admit I like the look of the Kriss mags.

Hello,
I have 2 15 round and 2 25 round Kriss mags, also 3 S&W15-22 mags and all function fine with any amount of ammo in them.

Sorry to hear your having problems, did you buy the 25 round Kriss mags new or were they used ?

,
andy

[snayperskaya]

I recently acquired a Kriss and it came with two 15 round Kriss mags and I have purchased two 25 round Kriss mags but on taking to the range for the first time on Sunday it functioned flawlessly with the 15 rounders but if I loaded the 25 round mags to capacity it wouldn't feed properly.

I loaded them with 15 and things were perfect so I then loaded them with 20 and again it run like a top, it is almost like the extra five rounds puts too much tension on the mag spring.Anyone else had this problem and is there a remedy, other than just loading 20.I did wonder if shortening the spring slightly may help.I also have a couple of S&W mags with it but I must admit I like the look of the Kriss mags.

Hello,
I have 2 15 round and 2 25 round Kriss mags, also 3 S&W15-22 mags and all function fine with any amount of ammo in them.

Sorry to hear your having problems, did you buy the 25 round Kriss mags new or were they used ?

,
andy

I bought them brand new, I was using CCI MiniMags and if I loaded the 25 rounders to capacity the rounds seemed to hit the breech face below the chamber rather than feed and the bullets were gouged, almost like they were sliced for want of a better description but as I said they were fine with 20 rounds in them.

[Airbrush]

I recently acquired a Kriss and it came with two 15 round Kriss mags and I have purchased two 25 round Kriss mags but on taking to the range for the first time on Sunday it functioned flawlessly with the 15 rounders but if I loaded the 25 round mags to capacity it wouldn't feed properly.

I loaded them with 15 and things were perfect so I then loaded them with 20 and again it run like a top, it is almost like the extra five rounds puts too much tension on the mag spring.Anyone else had this problem and is there a remedy, other than just loading 20.I did wonder if shortening the spring slightly may help.I also have a couple of S&W mags with it but I must admit I like the look of the Kriss mags.

Hello,
I have 2 15 round and 2 25 round Kriss mags, also 3 S&W15-22 mags and all function fine with any amount of ammo in them.

Sorry to hear your having problems, did you buy the 25 round Kriss mags new or were they used ?

,
andy

I bought them brand new, I was using CCI MiniMags and if I loaded the 25 rounders to capacity the rounds seemed to hit the breech face below the chamber rather than feed and the bullets were gouged, almost like they were sliced for want of a better description but as I said they were fine with 20 rounds in them.

Out of interest did you try with 24 rounds?

[Fenix1]

Found that my Kriss does not like CCI minimags, but is faultless with Eley club, thats in 15 round mags. Waiting for 25 round mags and a speed loader adapter to turn up. Burnt through about 200 rounds at the club today, split between a Kriss DMK22 and a Walther 1911 LBP. The speedloader made loading the 1911 mags so easy, ordered the adapter for the Kriss when I got home.

[Cornish-Viking]

Probably going to hang on until the Phoenix comps end of May and see whats available there. What optics are people using? Thinking of putting a Konus T30 on whatever I get.

Got a vortex strike eagle 1x8. Great glass and looks bad ass

[Fenix1]

My Kriss is happy with Eley club, unhappy with Eley contact, happy with SK semi auto. That's in 25 round mags, fully loaded using a speedloader. My Walther Gold Cup LBP seems to shoot anything.

[BLZeebub]

It's been a while but mine really hated RWS/SK during an ammo test session with a lot of misfires.

I gave it a thorough clean and tried again but any oily/greasy ammo still failed. Then i spotted the relatively recently replaced Ti firing pin was peened. After a chat with M9 a new one was sent out but this also had problems and shows no peening. M9 has sent me a blank to file to fit as fir some reason it seems to be striking short.

I've got a oem one to try aswell but it's a tad baffling.

B-)

[Fenix1]

Anybody got an ambidextrous charging handle they can recommend? Ideally one I can pickup easily, Blackrifles are out of stock at the moment.

Cheers