All people seeking membership must contact admin after registering to be validated.
https://mail.full-bore.co.uk/
I had mine shipped to the UK no fuss at all?Sim G wrote:How did you manage that, Jeff? I couldn't get them to ship to the UK. What ya got left?phaedra1106 wrote:First thing I did when I bought my GSG was throw away the push pins and all the screws and replace them with the kit from RRages http://rrages.com/screws/net.htm
I may still have a few bits left over if needed.
Sim G wrote:Scott, I got the pic and from your initial description the piece of metal is as much as I thought it is. It's the ejector.
The ejector is riveted to the inside left half of the bolt carrier. I'm presuming this has come away and from the side and is blocking the bolt from returning to battery.
I can't be doing with it anymore. Never buying another GSG5 ever hahaLyons wrote:Sim G wrote:Scott, I got the pic and from your initial description the piece of metal is as much as I thought it is. It's the ejector.
The ejector is riveted to the inside left half of the bolt carrier. I'm presuming this has come away and from the side and is blocking the bolt from returning to battery.
Ahh so I wasn't imagining it then? ok what's the easiest way to punt this thing? had it in to the cops?
Lyons wrote:Haha instead of the wooden spoon for TLD (team let down) we can have the GSG. I'm going to buy one for the next NESSCC
Blackstuff wrote:Hi folks,
As i have been left to my own devices this weekend i thought i'd get around to fitting a new lower onto my GSG-5, now that i've unspat my dummy with it by finally got it back into proper working orderI think it dramatically improves the look of the gun, as does adding the SD conversion kit;
Its an ICS airsoft lower from Zeroone Airsoft http://www.zerooneairsoft.com/advanced_ ... =MP5+lower Theres also an SEF version but that one requires you to permenant alter the selector switch, plus the selector switch doesn't line up with the letters properly.
Here's a step-by-step video if you want to do the mod to yours;
I'm nearly done with mine now, i just want get a micro red-dot for it (probably a Burris Fast-fire if i can find one for a non-ridiculous price), a UMP style folding stock, the HK pin set upgrade and the internal screw set upgrade. Speaking of which does anyone on here know anywhere that sells the screw upgrade set in this country? As the pi$$-poor screws coming loose were what was causing my gun to malfunction
