Page 1 of 1

Scope rail and scope for .357 Taurus LBR

Posted: Wed Jan 08, 2014 12:45 am
by CDM5
Trying to source a Taurus scope rail, been to 4 local gun shops and none have one. Even on the web I'm having trouble finding any in stock. Anyone know anywhere?

Once sourced I'll be after a scope or red dot, undecided one that. Most of my shooting with it is at 25-20 yards. So a dot may cover too much of the target at that range.

Don't want anything too heavy as it balances quite nicely at the moment.

Re: Scope rail and scope for .357 Taurus LBR

Posted: Wed Jan 08, 2014 1:07 am
by Dangermouse
Have you been in touch with Westlake Engineering? Sounds like his kind of thing,

DM

Re: Scope rail and scope for .357 Taurus LBR

Posted: Wed Jan 08, 2014 12:22 pm
by NoEntry
Have you tried Roger Francis at Rimfire Magic.

They used to stock them.

Mike

Re: Scope rail and scope for .357 Taurus LBR

Posted: Wed Jan 08, 2014 12:36 pm
by CDM5
Found a rail, Northern Optics.

Any pointers on what scope/red dot?

Re: Scope rail and scope for .357 Taurus LBR

Posted: Wed Jan 08, 2014 1:57 pm
by GRSporth1
Bushnell will be good in either scope or dot. I think Northern Optics sell them.
On the cheaper side, Hawke Red dots are not to be entirely neglected (the £40ish ones, not the £20).

If you are shooting out to 25yds against the clock e.g. Multi Target, a dot will be better as it will take you a bit longer to line up a scope with your eye and the target. Many of the cheaper pistol scopes have variable and/or inadequate eye relief.

Re: Scope rail and scope for .357 Taurus LBR

Posted: Wed Jan 08, 2014 11:01 pm
by judders
I stuck an Ultradot Matchdot on mine. Has an adjustable dot that's either 2,4,6 or 8 MOA. Works well for me:
Image

Re: Scope rail and scope for .357 Taurus LBR

Posted: Thu Jan 09, 2014 8:07 am
by ptheta
Do those scope rails require that you have the newer model with the ventilated rib? I have the older model with the solid rib and am a little tempted having seen that picture.

Re: Scope rail and scope for .357 Taurus LBR

Posted: Thu Jan 09, 2014 10:41 am
by judders
The way it fixes to the gun would mean that you'd have to have the ventilated rib.

It has two pieces of metal that slot through the vents and two screws in each to secure the rail to them. The picture above only has one fitted as the second (forward of scope) needed a bit of filing down to fit through the slot and I hadn't sorted it at that point.

Re: Scope rail and scope for .357 Taurus LBR

Posted: Thu Jan 09, 2014 10:53 am
by CDM5
Ordered a BSA Edge Pistol Scope, parallax is set for 50 yards, if I don't get on with it it can always go on the Marlin.

Re: Scope rail and scope for .357 Taurus LBR

Posted: Thu Jan 09, 2014 1:25 pm
by NoEntry
Mike looked like this just before I sold it.

Image

Image

Mike

Should have cleaned it BEFORE I photographed it :lol: