The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Ok
Could only get SP7 down where I am.
Looked on a site and it said SP7 was adaptable for calibers from .222 to .300WinMag
Now I thought, perfect- I reload .222 .243 and .300WinMag
Problem is all the info on loads I can find list a bit about the .222 and the WinMag but nothing on the .243.
Any ideas or pointers.
Thanks in advance
Jay

Checking with Quickload shows SP7 can be used for the .243 albeit only with case capacities around the 85% mark, what weight bullet do you use?

Use 100 and 105's

Have some 70's too if abs necc to be able to use the powder

Thanks

Built to 2.710" the absolute maximum powder load given by QL are as follows:

70 grain 45 grains
100 grain 40.5 grains
105 grain 39 grains

If you can let me have an email address and some more data such as OAL and actual bullet choice I can email you the full load data.

My faith in humanity is restored
Your a superstar. Neither of my manuals have anything in them.
Email address is jaytailslide yahoo.com

Thanks once again
Jay

Sorry forgot

OAL 2.65"
Sierra HPBT's 70's
Hornady gr's in 100's from memory as there are elsewhere.
Hornady A-Max in 105's

Thanks once again

I will try and email them over at the next coffee break tongueout

Ovenpaa
That would be great- for guidance only of course.
Jay

Well I have a coffee in my hand so will make a start and email it over shortly (For guidance only of course!)

tongueout

Barrel length?