Page 1 of 1
Cci mini mag issues
Posted: Sat Jan 25, 2014 12:37 pm
by zzr1100
About 30% of the time when I'm shooting mini mags the case fails to eject .. The claws pull it from the chamber ok but the case stays stuck in the claws ... This doesn't happen with cci std any ideas ? (Brno model 2)
Also a fellow club member said the mini mags can cause the chamber to oval over time ... Any experience of this ?
Cheers
Re: Cci mini mag issues
Posted: Sat Jan 25, 2014 1:29 pm
by farmer7
Sounds like a worn ejector I'd have thought.
Cant possibly see how mini-mags could oval your chamber either, its just another HV .22 round!
Re: Cci mini mag issues
Posted: Sat Jan 25, 2014 2:09 pm
by chancer2
Make sure your claws are the correct profile. Here's a link which may help. For me cci are always a bit tight anyway.
http://www.rimfireshooting.com/index.ph ... entry66315
Re: Cci mini mag issues
Posted: Sat Jan 25, 2014 2:21 pm
by zzr1100
Good info ... Thank you
Re: Cci mini mag issues
Posted: Sat Jan 25, 2014 9:39 pm
by BamBam
Make sure the chamber is clean, I had a similar issue with a match chambered VQ barrel.