Page 1 of 4
Hatsan MPA
Posted: Mon Aug 25, 2014 9:06 am
by ChrisB
Hello,
I have an Hatsan MPA 8+1.
Couple of mates have them as well but mine FTE most cartridges other than 70mm BB rounds and Geko Slug. I already have a straight pull rifle and dont need a straight pull shotgun as well!
It looks like the action is not blowing back quite far enough to complete the ejection.
Any suggestions? (other than bin it! :lol: )
sign92
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 9:11 am
by saddler
Send it back to the importers for repair/exchange
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 9:13 am
by M99
Have you tried cleaning it
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 9:17 am
by ChrisB
Tried through the dealer that sold it to me...useless git. Spoke to him once where he suggested that it needed running in, after that, he has failed to return any calls on the subject!
Must admit to have tried some things to improve things (fettling bolt carrier, polishing the mag tube etc.) so have probably knaffed the chance of some warranty work...
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 9:18 am
by ChrisB
MiLisCer wrote:Have you tried cleaning it
No. I have run out of C2R.... :lol:
Yes...
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 9:33 am
by saddler
The problem with cheap junk guns is if you get one that ain't working to start with it will probably not be cost effective to fix it.
As the saying goes, you can't polish a turd
WHO was the retailing RFD?
If you're not getting any response then go to the importers...they bring the junk in, so they'd be better off with it in their scrap bin & they can supply you a new replacement
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 9:41 am
by ChrisB
Will put a review of the RFD in the right place on the forum in a bit...
Who is the importer?
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 9:49 am
by leeroy7031
ChrisB wrote:Hello,
I have an Hatsan MPA 8+1.
Couple of mates have them as well but mine FTE most cartridges other than 70mm BB rounds and Geko Slug. I already have a straight pull rifle and dont need a straight pull shotgun as well!
It looks like the action is not blowing back quite far enough to complete the ejection.
Any suggestions? (other than bin it! :lol: )
sign92
MORE POWER, MAGNUM SHELLS clapclap
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 9:58 am
by M99
ChrisB wrote:MiLisCer wrote:Have you tried cleaning it
No. I have run out of C2R.... :lol:
Yes...
You didn't run out, the oompa loompa stole it!
Re: Hatsan MPA
Posted: Mon Aug 25, 2014 10:03 am
by ChrisB
leeroy7031 wrote:ChrisB wrote:Hello,
I have an Hatsan MPA 8+1.
Couple of mates have them as well but mine FTE most cartridges other than 70mm BB rounds and Geko Slug. I already have a straight pull rifle and dont need a straight pull shotgun as well!
It looks like the action is not blowing back quite far enough to complete the ejection.
Any suggestions? (other than bin it! :lol: )
sign92
MORE POWER, MAGNUM SHELLS clapclap
Hee.
