Page 1 of 2
It has started, project 6.5x47
Posted: Thu Apr 07, 2011 7:28 pm
by ovenpaa
At long last I have found the stock, this one is coming via reloading International (Thanks Mike Gregg)
Next on the shopping list:
Tikka M595 Action
1:8 500mm X 28mm Diameter barrel chambered in 6.5x47 Lapua screw cut for moderator
6X or 10X 'scope, I have a S&B in mind but I could equally be tempted by a Kahles ZF95 which although heavier gives me greater flexibility.
The plan is to get the barrel chambered and nailed to the action by someone (Hopefully the man that has built rifles for us in the past) I will do the stock work, final inletting and will bed the action.
What have I missed?
Re: It has started, project 6.5x47
Posted: Thu Apr 07, 2011 8:04 pm
by Robin128
Pink bolt knob.
:)
Re: It has started, project 6.5x47
Posted: Thu Apr 07, 2011 8:38 pm
by 20series
Robin128 wrote:Pink bolt knob.
:)
:lol: :lol: :lol:
More likely bright red to match Christels hair! :lol: :lol:
Alan
Re: It has started, project 6.5x47
Posted: Thu Apr 07, 2011 8:56 pm
by ovenpaa
Depends on the Action I manage to find but I suspect it is going to be a nice boring blued finish
There is a bit of a trend at the moment to have a coloured barrel, deep red looks good but I am not sure I have the nerve to do such a thing :roll:
Re: It has started, project 6.5x47
Posted: Thu Apr 07, 2011 9:08 pm
by 20series
looks like a nice stock, with plenty of adjustment
I have half a plan for a 6.bowl?? next year myself, although I think I might go for an AR in 6.5 Grendal.
good luck witht he project mate, I look forward to seeing it on the ranges in the future.
Alan
Re: It has started, project 6.5x47
Posted: Thu Apr 07, 2011 9:35 pm
by Mike357
Ovenpaa, Erm how about a trigger :-)
Re: It has started, project 6.5x47
Posted: Fri Apr 08, 2011 7:54 am
by ovenpaa
Very good point Mike!
Apparently the M595 triggers are good as standard and there are a couple of after market options available. My preference has always been two stage so trigger choice is going to be dependant on what comes with the Action which hopefully will give me the trigger guard and action screws as well.
Re: It has started, project 6.5x47
Posted: Sat Apr 09, 2011 7:14 pm
by dirtbag
ovenpaa wrote:At long last I have found the stock, this one is coming via reloading International (Thanks Mike Gregg)
Next on the shopping list:
Tikka M595 Action
1:8 500mm X 28mm Diameter barrel chambered in 6.5x47 Lapua screw cut for moderator
6X or 10X 'scope, I have a S&B in mind but I could equally be tempted by a Kahles ZF95 which although heavier gives me greater flexibility.
Tika_stock.jpg
The plan is to get the barrel chambered and nailed to the action by someone (Hopefully the man that has built rifles for us in the past) I will do the stock work, final inletting and will bed the action.
What have I missed?
Nice !
Thats what I love about projects, I bet you think about it everyday , am I correct ?
Re: It has started, project 6.5x47
Posted: Sat Apr 09, 2011 8:14 pm
by ovenpaa
I talked about a new 600m rifle three years ago but never could find something that set me alight so to speak, then I watched a hunting comp in DK last September and thought yup, this is for me.
Oddly for me it will be a factory chamber but should be accurate even with a fairly skinny Action and barrel. Despite the fairly traditional appearance it will have a 'signature' of some sort. Right now I am thinking of deep maroon barrel
Re: It has started, project 6.5x47
Posted: Sat Apr 09, 2011 9:41 pm
by dirtbag
ovenpaa wrote:I talked about a new 600m rifle three years ago but never could find something that set me alight so to speak, then I watched a hunting comp in DK last September and thought yup, this is for me.
Oddly for me it will be a factory chamber but should be accurate even with a fairly skinny Action and barrel. Despite the fairly traditional appearance it will have a 'signature' of some sort. Right now I am thinking of deep maroon barrel
Good stuff, why not put flames on the stock !!