Page 1 of 2
Trigger guard screw M96 / M41b
Posted: Fri Jul 24, 2015 2:22 pm
by M41B
I'm after the extended trigger guard screw so I can fit the optional pistol grip for my Swedish Master.
Any ideas where I can get one or anyone got one knocking about?
Thanks in advance.
Mat
Re: Trigger guard screw M96 / M41b
Posted: Fri Jul 24, 2015 2:23 pm
by M41B
I meant Mauser. ... damn phone!!!
Re: Trigger guard screw M96 / M41b
Posted: Fri Jul 24, 2015 8:23 pm
by saddler
Er.
Long story....ya may need to become friends with a lathe owner.
Had (have?) an ongoing project for a while to get a batch made.
Still waiting for completion date.
They're becoming hard to find even in Sweden, hence the project.
Got at least one spare add on pistol grip here that could do with screws.
Will email my contacts. Need to ask him about some Swedish bicycle parts anyway.
Re: Trigger guard screw M96 / M41b
Posted: Fri Jul 24, 2015 10:39 pm
by Alpha1
How long are they what pitch are they etc.
Re: Trigger guard screw M96 / M41b
Posted: Fri Jul 24, 2015 10:46 pm
by Alpha1
Re: Trigger guard screw M96 / M41b
Posted: Sat Jul 25, 2015 7:05 am
by greenshoots
think i have one you can have for half that, if i remember the pitch is an odd one had to have one made up for my 1903 msch
greenshoots
Re: Trigger guard screw M96 / M41b
Posted: Sat Jul 25, 2015 7:11 am
by M41B
That would be great, thank you for all the replies.
Mat
Re: Trigger guard screw M96 / M41b
Posted: Sat Jul 25, 2015 7:56 am
by greenshoots
right i have 3 canditates all different lenghts, what size do you require only other option is to contact scott stonehill to make you one
greenshoots
Re: Trigger guard screw M96 / M41b
Posted: Sat Jul 25, 2015 8:01 am
by ovenpaa
Shout if you get stuck Mat, I have some suitable steel here so I just need one of your drawings
Re: Trigger guard screw M96 / M41b
Posted: Sat Jul 25, 2015 8:14 pm
by M41B
Apologies for the delay in replying, right I've had a measure up and I think I need it to be about 1.895" in length not including the head. The thread is 0.248" diameter right hand thread. I can count 8 turns in approx 0.410" length of thread. The existing bolt has a flat bottom to the head (sorry not very technical I'm afraid) but the new one could be counter sunk with a diameter of about 0.400".
Regards
Mat