Page 1 of 1
NOE slug mould.
Posted: Fri Jan 08, 2016 10:43 am
by dromia
Just to let anyone who is interested know that there is a discussion thread over on the NOE forum about having them cut a 12 bore slug mould based on the Lyman 525gn, waisted, hollow based slug.
Ten people signing up will get the mould done.
http://noebulletmolds.com/smf/index.php ... cseen.html
Re: NOE slug mould.
Posted: Fri Jan 08, 2016 12:10 pm
by saddler
Timely
I'd just had a rely from Mihec molds in Europe about his similar double cavity 525gr sabot slug mold.
Wil have to see which looks best...
Re: NOE slug mould.
Posted: Fri Jan 08, 2016 3:32 pm
by dromia
As the NOE mould is in the discussion stage it means you can contribute to its specification.
Re: NOE slug mould.
Posted: Fri Jan 08, 2016 5:36 pm
by saddler
Pity a triple is not an option...
Re: NOE slug mould.
Posted: Fri Jan 08, 2016 6:21 pm
by dromia
Number of cavities is limited by the maximum block size.
Re: NOE slug mould.
Posted: Fri Jan 08, 2016 7:10 pm
by saddler
The LEE buckshot molds are a good length....
Thought it may have been down to a cast weights/cooling time ratio.
Re: NOE slug mould.
Posted: Fri Jan 08, 2016 7:16 pm
by dromia
Each maker will have their own standard block size(s) that their machinery will be set up for.