How to put a moderator on initial grant?

New to the sport? Or just not sussed something out yet? Please ask your questions in here, there are many experienced shooters on the forum and someone will for sure come along and answer your question. This is a section for new shooters so if anyone can think of something please submit it.

Moderator: dromia

Message
Author
Lancs_Oakley
Posts: 116
Joined: Sat Oct 21, 2017 8:02 am
Home club or Range: Diggle
Contact:

How to put a moderator on initial grant?

#1 Post by Lancs_Oakley »

Hello, new poster and first question of many :D

I am sending off my FAC and have read on here its a good idea to include a mod on your FAC because it allows 1 for 1 swap later without going through a variation.

I have applied for a .22LR, 223 and 308. Is it best to put down for each?

Other than that I think I am ready to go so will be back soon for more questions!

Thanks. cheers
User avatar
old_n07
Posts: 62
Joined: Thu Nov 07, 2013 9:28 am
Home club or Range: FCSA \ Uttoxeter Rifle Club
Location: Stoke-on-Trent
Contact:

Re: How to put a moderator on initial grant?

#2 Post by old_n07 »

Hello and welcome

Yes put a mod down for each cal and if questioned just say it is for health and safety reasons - but you probably won't be
Lancs_Oakley
Posts: 116
Joined: Sat Oct 21, 2017 8:02 am
Home club or Range: Diggle
Contact:

Re: How to put a moderator on initial grant?

#3 Post by Lancs_Oakley »

Thanks, how should I term that in the slot just put

Cal - 223 and type moderator?

Do you have to put anything in the reason box? Or just put H&S?

Thanks.
User avatar
WelshShooter
Full-Bore UK Supporter
Posts: 1808
Joined: Wed Jun 25, 2014 9:45 pm
Contact:

Re: How to put a moderator on initial grant?

#4 Post by WelshShooter »

That's exactly right. I put down for two 22lr, one 6.5mm and a 223 moderator. Stated health and safety as I only do target shooting, and got them no problem. This was during my FAC renewal after 5 years. When you buy a moderator, chances are they won't have a serial number so when you said paperwork to plod you can put "no visible number" under the section for serial number.

Also welcome to the forum!
Oddbod

Re: How to put a moderator on initial grant?

#5 Post by Oddbod »

I put down H&S & reducing noise pollution. Was granted four moderators with no questions.
Biggles

Re: How to put a moderator on initial grant?

#6 Post by Biggles »

Oddbod wrote:I put down H&S & reducing noise pollution. Was granted four moderators with no questions.
+ 1
Same here.
I didn't have a problem.
As with everything you apply for just make sure you have a viable reason that you can talk through if / when asked.
I was given some sound advice to have reasoned justification for calibers so you can talk through them at interview stage.
"My mate down the club said this is what I should ask for" doesn't really show you in a good light.

Think what to say when asked "why do you want a .308 and a .223" etc.
I was quizzed on why I wanted a .223 as well as a .308.

Mods should be the easy bit.This is from BASC's how to guide to firearms application....

For a sound moderator you might enter “to protect hearing and reduce disturbance” for example.

https://basc.org.uk/wp-content/uploads/ ... e-2015.pdf

Oh and in the TYPE section just put "Rifle" don't put, bolt action ,semi auto ot straight pull.
Otherwise it might come back as action specific , which will limit your choice if you change your mind.
User avatar
ovenpaa
Posts: 24687
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: How to put a moderator on initial grant?

#7 Post by ovenpaa »

Welcome to the forum Lancs_oakley and good luck with your application :wave:
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
Rockhopper
Posts: 910
Joined: Mon Nov 09, 2015 2:36 pm
Contact:

Re: How to put a moderator on initial grant?

#8 Post by Rockhopper »

You still need to apply for a variation though if you don't want the mods but you save the £20 fee.
Lancs_Oakley
Posts: 116
Joined: Sat Oct 21, 2017 8:02 am
Home club or Range: Diggle
Contact:

Re: How to put a moderator on initial grant?

#9 Post by Lancs_Oakley »

Thanks all. Good info.

Out of interest how much space does 1500 RF take up? Just deciding if I need an ammo safe?
Rockhopper
Posts: 910
Joined: Mon Nov 09, 2015 2:36 pm
Contact:

Re: How to put a moderator on initial grant?

#10 Post by Rockhopper »

It'll fit in a small safe but probably not in an internal one.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests