Westlake Alfa Revolver 4" .357/.38 (full package)
Posted: Sun Aug 01, 2021 10:52 am
For sale is my Westlake Alfa revolver. Condition is overall good with a couple of surface scratches from general use and dinks to the grips. It cycles and indexes smoothly and the trigger in single action is excellent for target shooting.
It is the 4" model and comes with:
- Second/spare cylinder
- Loading press
- Westlake charger/powder thrower with 2 x powder tubs
- 2 x partial boxes of primers and possibly a full box (if I can find them, no promises)
- Several hundred bullets, a mix of Westlake's dustbins and full box of Shellhouse Bullet Co. soft lead bullets, specifically for this revolver
Price for the lot - £900, or if collecting I also have a full tub and a half tub of Herco which I will sell for the price of the full tub - £945
This is the full package for someone looking to get started with one of these. You will not need to buy anything else.
I can RFD at cost (I believe around £25) but would prefer to meet at Bisley. I do travel for work, so happy to travel to meet if needed and/or possible.
Note that the spare cylinders on these are numbered and made for the frame at the point of manufacture, this means it fits it exactly. You will need 2 slots, one slot for '1 x .357/.38 muzzle loading revolver' and a slot for a '1 x .357/.38 muzzle loading cylinder'.
The powder thrower makes loading this a breeze at the range. It dispenses 2.8gr with each press, which will cover any powder used (these are recommended with Green Dot, Unique, Herco or Blue Dot).
It is the 4" model and comes with:
- Second/spare cylinder
- Loading press
- Westlake charger/powder thrower with 2 x powder tubs
- 2 x partial boxes of primers and possibly a full box (if I can find them, no promises)
- Several hundred bullets, a mix of Westlake's dustbins and full box of Shellhouse Bullet Co. soft lead bullets, specifically for this revolver
Price for the lot - £900, or if collecting I also have a full tub and a half tub of Herco which I will sell for the price of the full tub - £945
This is the full package for someone looking to get started with one of these. You will not need to buy anything else.
I can RFD at cost (I believe around £25) but would prefer to meet at Bisley. I do travel for work, so happy to travel to meet if needed and/or possible.
Note that the spare cylinders on these are numbered and made for the frame at the point of manufacture, this means it fits it exactly. You will need 2 slots, one slot for '1 x .357/.38 muzzle loading revolver' and a slot for a '1 x .357/.38 muzzle loading cylinder'.
The powder thrower makes loading this a breeze at the range. It dispenses 2.8gr with each press, which will cover any powder used (these are recommended with Green Dot, Unique, Herco or Blue Dot).