Variation on a visit?
Moderator: dromia
Re: Variation on a visit?
Good luck. This was my first grant just to give you an idea:
2 x .22 (1,200 rounds)
1 x .223/5.56 (300 rounds)
2 x .308/7.62x51 NATO (600 rounds)
1 x .303 (300 rounds)
Remember for most licensing authorities, just because you have .308 on your ticket, it doesn't entitle you to 7.62x51 NATO unless your ticket explicitly states that caliber, so list both under the same slot. The same applies to your .223 slot, have it added as .223/5.56. I appreciate a few authorities see this slightly differently, but most don't.
2 x .22 (1,200 rounds)
1 x .223/5.56 (300 rounds)
2 x .308/7.62x51 NATO (600 rounds)
1 x .303 (300 rounds)
Remember for most licensing authorities, just because you have .308 on your ticket, it doesn't entitle you to 7.62x51 NATO unless your ticket explicitly states that caliber, so list both under the same slot. The same applies to your .223 slot, have it added as .223/5.56. I appreciate a few authorities see this slightly differently, but most don't.
- meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: Variation on a visit?
'Er Maj's Law only requires you to state calibre, oomans, not chamber. Hence 7.62 permits NATO / Russian and Soviet rounds (7.62 x51, 7.62x54R, 7.62x39) To be safe, state 7.62 / .308
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Re: Variation on a visit?
Under Northamptonshire licensing, if you apply for .308/7.62 it doesn't authorise you to buy a rifle chambered in 7.62x54R or 7.62x39, only 7.62x51, as that's the metric equivalent to .308.
- meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: Variation on a visit?
Northamptonshire Plod is wrong then...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
- Blackstuff
- Full-Bore UK Supporter
- Posts: 7820
- Joined: Sun Nov 07, 2010 1:01 pm
- Contact:
Re: Variation on a visit?
Same with Durham when i initially applied, just wanted 7.62 rifle on the FAC as i hadn't decided between a .308, Draganov or AK variant. They wouldn't have it so ended off having to ask for .308Win/7.62x51mm. And that was before Durham went downhill!!
Can't see any issue with adding the .303, when you're already asking for a .308
Can't see any issue with adding the .303, when you're already asking for a .308
DVC
Re: Variation on a visit?
And will continue to do so until the people they're paid to serve tell them how to do it right, by following the law and guidance ;-)HALODIN wrote:They all do things slightly differently.
- Mattnall
- Full-Bore UK Supporter
- Posts: 2926
- Joined: Wed Mar 06, 2013 5:32 pm
- Home club or Range: NRA, Redricks TSC, BS1944RC, HRA
- Location: East Herts
- Contact:
Re: Variation on a visit?
Latest guidance says that a wide choice.of.cartridges or just a calibre choice should not be allowed.
Arming the Country, one gun at a time.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Re: Variation on a visit?
Same happened to me when I got my first Scottish FAC.ozone wrote:My FEO advised me to put moderators on, with all the Health & Safety stuffHALODIN wrote:You'll be fine, I did something similar. When your FEO (not FLO) comes to see you, he fills out the application form again, so you can discuss your needs as it's filled out. You might want to ask for 4 moderators as well, they don't seem too bothered about them. They generally improve accuracy, so it's easy to justify.
he said it would be a good idea for target shooting as it keeps the noise down
on the firing point.
ozone
.
I'd not listed moderators, (other than .22), but the FEO had me add them when he came out to see me.
- Geek
- Full-Bore UK Supporter
- Posts: 1406
- Joined: Sun Dec 02, 2012 2:04 am
- Home club or Range: Diggle Range and Rossendale Fusiliers
- Location: North West
- Contact:
Re: Variation on a visit?
This was my first FAC circa 2012
.22LR + moderator x 3 (logic being - 1No each of tactical, semi auto rifle style and bolt action)
223/5.56 bolt action
.38 / .357 under-lever
9mm long barrelled pistol (I did ask for this to be push release lever)
Shotgun - section 1
During the visit it was discussed that I had also asked for a 7.62/3.08 which was a little too much for a first FAC and I had to lose one - I chose to lose the 7.60/.308. It was also asked if I want black powder: I didn't but wish I had to get the 'spare slot'.
What you end up buying may well be very different to the first application: mine is different now have listed / own:
.22LR x2 + 1No moderator (have Ruger 10/22 and Sako Quad)
.22WMR barrel for Sako Quad
.223/5.56 (have Styer Aug)+ .223/5.56 moderator
.38/.375 (have Marlin underlever)
Section 1 shotgun (Fabarm 10+1)
.308/7.62 (not bought yet)
Centre fire moderator
.303 (not bought yet and may change for something else)
.22LR + moderator x 3 (logic being - 1No each of tactical, semi auto rifle style and bolt action)
223/5.56 bolt action
.38 / .357 under-lever
9mm long barrelled pistol (I did ask for this to be push release lever)
Shotgun - section 1
During the visit it was discussed that I had also asked for a 7.62/3.08 which was a little too much for a first FAC and I had to lose one - I chose to lose the 7.60/.308. It was also asked if I want black powder: I didn't but wish I had to get the 'spare slot'.
What you end up buying may well be very different to the first application: mine is different now have listed / own:
.22LR x2 + 1No moderator (have Ruger 10/22 and Sako Quad)
.22WMR barrel for Sako Quad
.223/5.56 (have Styer Aug)+ .223/5.56 moderator
.38/.375 (have Marlin underlever)
Section 1 shotgun (Fabarm 10+1)
.308/7.62 (not bought yet)
Centre fire moderator
.303 (not bought yet and may change for something else)
Regards,
Geek
AI AT (.308/6.5CM), Ruger PR (6.5CM), American Rimfire (.22LR), Remington 700 (.223), Marlin underlever .38/.357/.44, Savage 6BR, RimfireMagic .22LR, Fabarm Lion (s1), Fabarm Axis Baikal S/S
Geek
AI AT (.308/6.5CM), Ruger PR (6.5CM), American Rimfire (.22LR), Remington 700 (.223), Marlin underlever .38/.357/.44, Savage 6BR, RimfireMagic .22LR, Fabarm Lion (s1), Fabarm Axis Baikal S/S
Who is online
Users browsing this forum: No registered users and 0 guests