Bullet casting equipment.

Anything shooting related wanted.

Moderator: dromia

Forum rules
All groups are welcome to post unless your user name is in Newly Registered Red, your post will be removed.
No disparaging remarks, if you don't like what you see then don't buy it.
Post Reply
Message
Author
TomEnfield
Posts: 129
Joined: Sun Feb 15, 2015 2:11 pm
Home club or Range: LERA
Contact:

Bullet casting equipment.

#1 Post by TomEnfield »

Does any one have for sale equipment for casting bullets?
Looking for:
stove/burner
Cast iron pots
Ingot moulds
Mould handles
Ladles
Flux
Lead
Tin
Copper wire
Etc etc

thankssign
User avatar
dromia
Site Admin
Posts: 20087
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Bullet casting equipment.

#2 Post by dromia »

Car boot sales are your friend here Tom.

Yorkshire pudding trays make good ingot moulds.

Old cooking utensils are good for stirring, scooping and ladling.

A 3/32" hole drilled in a soup ladle just up from the base makes a good pourer.

Dry wood/sawdust is all you need for flux.

Lead is the area of contest, friendships have been eternally broken and violence contemplated and exercised in the quest for good casting alloy.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Dahonis

Re: Bullet casting equipment.

#3 Post by Dahonis »

TomEnfield wrote:Does any one have for sale equipment for casting bullets?
Looking for:
stove/burner.....ebay around £8-19 depending on what you want.
Cast iron pots......4ltr Dutch Oven £27.99 (Ronnie Sunshines)
Ingot moulds....... as Adam says £3 (Tesco)
Mould handles..... Kranks £13.30 or included with some Lee moulds.
Ladles...... I use a soup ladle with a small hole drilled in.
Flux
Lead.....Churches, ebay, b&q. Going rate on ebay for 10kg of used lead flashing inc delivery is £23.00
Tin..... ebay
Copper wire
Etc etc

thankssign
I use all the above stuff and it works really well.

Cheers

Chris :flag13:
FredB
Posts: 969
Joined: Fri Dec 10, 2010 8:33 pm
Home club or Range: stourport
Location: Wolverhampton
Contact:

Re: Bullet casting equipment.

#4 Post by FredB »

You don't need a cast iron pot---I have one and never use it these days. The steel tins which DIY stores sell for mixing paint in work better.
Fred
TomEnfield
Posts: 129
Joined: Sun Feb 15, 2015 2:11 pm
Home club or Range: LERA
Contact:

Re: Bullet casting equipment.

#5 Post by TomEnfield »

Thank you for your advice.
25Pdr

Re: Bullet casting equipment.

#6 Post by 25Pdr »

Don't forget Safety Glasses and a full face mask.

A few drops of water on the surface of molten lead is not a problem but if you introduce even a small amount of water under the molten lead it will turn to steam and will eject the contents of the pot in your face.

This can be done by dropping scrap lead with water in it into the mix and even water remaining in your ladle if you happen to dunk it in water to cool it.
River

Re: Bullet casting equipment.

#7 Post by River »

I also use a Yorkshire Pudding tray, from a car boot, also got a great, cheep, stainless steel saucepan. As Dromia said car boots are your friend - also, look out for old knackered pewter mugs to ad to your lead, I generally pay 50p for a pint mug!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests