Wanted - a couple of M6 Fine HT cap heads

[ovenpaa]

I am after a couple of M6 Fine (M6x0,75mm) High Tensile cap head screws although stainless would do at a push. Ideally 12mm long however longer is fine.

These are the same thread as the screws that hold the receiver to the stock on the M54 if you were wondering :)

[Dark Skies]

Try these guys:
https://www.cwfasteners.co.uk/specialist/

[artiglio]

Only place i could find them was from china via the auction site, did have a couple of spare i’ll see if i can dig them out.

[ovenpaa]

Try these guys:
https://www.cwfasteners.co.uk/specialist/

They don't appear to stock M6 Fine.

[ovenpaa]

Phil, that would be handy if you can put your hands on a couple. I have ordered some from HK however they are going to be a couple of weeks away at least...

[Polchraine]

M6x0.75 did not sound like a thread I was aware of, so I had look around and found that M6 can have:. 0.5. 0.7. 0.75. 0.80 or 1.0 pitch ... https://www.engineersedge.com/hardware/ ... sizes1.htm