Page 1 of 1
Sako Finfire P94S
Posted: Sat Oct 25, 2014 7:12 am
by chancer2
I would like to know what the head space should be on this rifle please. If anyone can point me to where I can find this information I would be most grateful. David.
Re: Sako Finfire P94S
Posted: Sat Oct 25, 2014 7:37 am
by DL.
chancer2 wrote:I would like to know what the head space should be on this rifle please. If anyone can point me to where I can find this information I would be most grateful. David.
The rim on ammunition is the headspace. The two allen bolts that clamp the barrel into the action are what you need to adjust.
Re: Sako Finfire P94S
Posted: Tue Nov 04, 2014 3:36 pm
by chancer2
Thanks, been told by local rifle maker to set it at 0.041" Its 0.043 at the moment so I'll leave it alone while I check the effects of other mods that have been done. David.
Re: Sako Finfire P94S
Posted: Tue Nov 04, 2014 3:44 pm
by DL.
chancer2 wrote:Thanks, been told by local rifle maker to set it at 0.041" Its 0.043 at the moment so I'll leave it alone while I check the effects of other mods that have been done. David.
I don't know if you've tried CCI ammunition, but if you do, I think you'll find it pretty tight.