Lee Zero Error Target Model Loader .222rem

[Triple2]

Lee Zero Error Target Model Loader in .222rem, no longer in production.

Excellent kit, I've been able to produce ammunition that capable of 0.5moa. In good working condition, the only fault is the neck reamer no longer screws into the reamer crank, as the threads have nipped off. This hasn't been a problem as the reamer can be used in a drill. The dipper in the kit is not the original, but has been altered for use with Reloder7.

Also comes a spare Lee case cutter and stud lock.

£50 posted

[Triple2]

£40 posted

[Triple2]

sold

[dromia]

Now that was when Lee made good stuff that was real quality, I have quiet a few of these now as I have been gathering them over the years and really enjoy using them, the priming tool has to be one of the best ever made for feel I have been lucky enough to collect all the shell holders for them too.

I would have had this but I have three 222 sets already, the neck reaming can get a bit hard work but if you are only doing 25 rounds for a season at the hinds then they are spot on and make very fine ammunition indeed.

[Triple2]

Yes, they are excellent. It really goes to prove you don't have to spend a fortune on an elaborate reloading set up to produce accurate ammo.