P 14 Winchester Extractor

Message

DOGGER2UK · #1 Post by **DOGGER2UK** » Sun Mar 22, 2015 10:08 am

Does anyone have, for sale, an extractor for the bolt of a Winchester P14 rifle or know of any dealers who may be able to help?

DOGGER2UK · #2 Post by **DOGGER2UK** » Sun Mar 22, 2015 10:29 am

Forgot to say that this is for a 7.62mm conversion.
Is it possible to build up the extractor claw with weld and then file to shape? I realise that the extractor is probably spring steel and welding may harm the springyness (if that's the correct term!)

Ian · #3 Post by **Ian** » Sun Mar 22, 2015 10:51 am

Mine broke at Bisley so I popped into Fulton's and they had one off the shelf. 7.62mm ready as well. £15 fitted on the spot, not that difficult.

#4 Post by **safetyfirst** » Sun Mar 22, 2015 11:06 am

Try the Wirksworth gun room. They have a knackered p14 with a good bolt.

Maggot · #5 Post by **Maggot** » Mon Mar 23, 2015 8:41 am

Call Phil Rose on 01425470561

or

pjrcollectables@hotmail.com

Phil has a unit full of enfield bits going right back, and he is very fair with his prices.

He has helped me and Ovenpaa out over the years with bits and bats, and has just done a nice re-barrel and woodwork job on my mates SMLE.

Top bloke (real Boer War nut as well, a mine of info)

#6 Post by **dromia** » Mon Mar 23, 2015 9:38 am

Shandwick supply used to have a lots of P14 bits, worth a phone call.

DOGGER2UK · #7 Post by **DOGGER2UK** » Mon Mar 23, 2015 11:27 am

Maggot & dromia thanks for your input. Shandwick's are out of stock and Phil Rose is getting back to me. Both suggested that I try and find the extractor for the P17 rifle as this was chambered for the 30-06 round and will need no alteration.

So has anyone got a spare P17 extractor !!

Thanks again for your help

Maggot · #8 Post by **Maggot** » Mon Mar 23, 2015 12:24 pm

Phils place is a bit of an Aladin's cave.

He may well have one but will have to check several locations.

#9 Post by **NoEntry** » Tue Aug 16, 2016 8:55 am

Maggot wrote:Call Phil Rose on 01425470561

or

pjrcollectables@hotmail.com

Phil has a unit full of enfield bits going right back, and he is very fair with his prices.

He has helped me and Ovenpaa out over the years with bits and bats, and has just done a nice re-barrel and woodwork job on my mates SMLE.

Top bloke (real Boer War nut as well, a mine of info)

Just wanted to say what a helpful guy Phil Rose is.
He went the extra mile to help me with a broken p14/17 extractor.

Brillant.
Mike

The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

P 14 Winchester Extractor

P 14 Winchester Extractor

Re: P 14 Winchester Extractor

Re: P 14 Winchester Extractor

Re: P 14 Winchester Extractor

Re: P 14 Winchester Extractor

Re: P 14 Winchester Extractor

Re: P 14 Winchester Extractor

Re: P 14 Winchester Extractor

Re: P 14 Winchester Extractor

Who is online